Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2015
    Location
    Houston, TX
    Posts
    95

    Default Recommendations on running speaker wire

    I have a 2011 Launch 22V, and I want to install a Wetsounds zone controller at the helm. Any recommendations on the best way to run the speaker wire from the helm to the head unit, which is in the glove box on the port side of the boat? For those who have done it, is there enough clearance to run up behind the seat around the bow, and use the speaker holes to do a little zip tying as I go? What about navigating around the point of the bow, that's a pretty long stretch with limited access.

    The boat is an hour away, so I can't dig around in at the moment, and I'm just trying to do some planning and I want to order all of the wiring when I order the zone controller.

    Thanks in advance,
    Mark
    Mark
    2011 Launch 22V

  2. #2
    Join Date
    Jan 2016
    Location
    Indiana
    Posts
    14

    Default

    Think maybe they got you covered over on the Moomba site...

  3. #3
    Join Date
    Aug 2015
    Location
    Houston, TX
    Posts
    95

    Default

    Yes, thanks, post is answered on the Moomba site!
    Mark
    2011 Launch 22V

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •