Results 1 to 8 of 8
  1. 10-23-2017, 08:39 AM #1
    Shivelz
    Shivelz is offline Junior Member
    Join Date
    Oct 2017
    Posts
    5

    Default Ignition issues 07 21v

    I have had some issues with the ignition. Have power on all 3 wires as I turn the key, but the gauges wont come on and the boat will not even think about starting... the last time this happened I was able to pull the relay to the ecm and put a 12v jumper and it started the ecm and everything was fine. This time that isn't working... I have full power to the rest of the boat just not on the ignition side.... any ideas?
    Reply With Quote Reply With Quote
  2. 10-23-2017, 10:23 AM #2
    CJD
    CJD is offline Senior Member
    Join Date
    Dec 2013
    Posts
    645

    Default

    Have you checked the big 40 amp breaker in the engine bay?
    Reply With Quote Reply With Quote
  3. 10-23-2017, 03:10 PM #3
    leetudor
    leetudor is offline Senior Member
    Join Date
    May 2008
    Location
    Mt Juliet, TN
    Posts
    245

    Default

    Quote Originally Posted by Shivelz View Post
    I have full power to the rest of the boat just not on the ignition side.... any ideas?
    Are you saying no power coming off the key switch?
    1987 Supra Saltare
    PCM 454
    Reply With Quote Reply With Quote
  4. 10-23-2017, 03:21 PM #4
    Shivelz
    Shivelz is offline Junior Member
    Join Date
    Oct 2017
    Posts
    5

    Default

    Quote Originally Posted by CJD View Post
    Have you checked the big 40 amp breaker in the engine bay?
    Yes. I have pulled it out and checked the ohms also and everything checks out
    Reply With Quote Reply With Quote
  5. 10-24-2017, 03:15 PM #5
    Shivelz
    Shivelz is offline Junior Member
    Join Date
    Oct 2017
    Posts
    5

    Default

    I have power on all three legs of key switch
    Reply With Quote Reply With Quote
  6. 11-12-2017, 07:39 PM #6
    Shivelz
    Shivelz is offline Junior Member
    Join Date
    Oct 2017
    Posts
    5

    Default

    Found it. Believe it or not it was my ground cable end . It was corroded enough that sometimes it would make or not make enough contact...
    Reply With Quote Reply With Quote
  7. 11-14-2017, 12:59 AM #7
    docdrs's Avatar
    docdrs
    docdrs is offline Senior Member
    Join Date
    Aug 2009
    Location
    London, Ontario, Canada
    Posts
    1,187

    Default

    Thank you for the update and the culprit.
    2009 21v Worlds 340 Cat
    run your engine after you change the oil
    Doug
    Reply With Quote Reply With Quote
  8. 11-14-2017, 06:32 AM #8
    Shivelz
    Shivelz is offline Junior Member
    Join Date
    Oct 2017
    Posts
    5

    Default

    Just glad it was nothing major. Just quite a few frustrating hours of narrowing it down..
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules