Originally Posted by
Salty87
That sucks. The exhaust pipes probably won't come out with the floor intact. I haven't tried but the motor side ends of the pipes have a 45 degree bend. And, the factory foaming job pretty much glued the pipes in place. The pipes are pretty thick so unlikely they'll rust out.
Does your flooring go all the way back to the transom? Some models/years had the floor stop about a foot short of the transom. Nice access to all that stuff.
Did you re-use the same screw holes for the baseplates of the trapps?...or fill them in (marine tex or epoxy, etc) and drill new holes?
You found the joint a couple inches up the pipes that needs sealant?