Results 1 to 5 of 5
  1. #1
    Join Date
    May 2018
    Location
    British Columbia, with a cabin on Okanagan Lake
    Posts
    2

    Default 1991 Supra Comp vent window

    Hi, I am a new member. I was hoping that someone on the site might be able to help me with an issue on my 1991 Supra Comp. I recently lost the driver's side vent window when I was pulling it up to the Okanagan. I did not secure it and I had a broken handle. My own fault! Now I have discovered that these are not easily found. Just wondering if someone knows if it is possible to cut a new one using my passenger side window or where I could get a replacement? The boat is in excellent shape and does well pulling my family skiing.

    Alex

  2. #2
    Join Date
    Aug 2010
    Location
    Oyama, B C , Canada
    Posts
    650

    Default

    Sorry for your loss.
    Extremely tough to find a used one never mind the handle that attaches.
    Best bet is to take a template to a glass shop and have one cut.
    As for the handle I do recall someone on this site had some made up out of metal using lathe etc.
    Best of luck

  3. #3
    Join Date
    Dec 2016
    Posts
    208

    Default

    I bet the handle could be printed....might be something Milliken37 and his seemingly limitless tooling supply could do

  4. #4
    Join Date
    May 2018
    Location
    British Columbia, with a cabin on Okanagan Lake
    Posts
    2

    Default

    Thanks for the advice about getting a window cut. I will give it a try.
    I think I have figured out the handles as I just ordered them off of Amazon. Here is what I found them under: Sea-Dog 324380-1 Vent Side Adjuster Kit
    I am pretty sure they are the same thing, as when I was on another site they gave the measurements that matched what I measured on the boat. I will let you know if they fit once I get them.

  5. #5
    Join Date
    May 2010
    Location
    Ft. Wayne, IN
    Posts
    13

    Default

    I had to replace the original plastic handle on mine last year (89 Pirata). It works but the holes dont line up well on the inside so I drilled new ones. Aside from that it works pretty good

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •