Results 1 to 3 of 3
  1. #1

    Default DIY underwater ledís

    Took 5 lights from ďOziumĒ I think itís called. Drilled 5 holes for the lights in a piece of aluminum, the lights have a small ring around the base which Is wider than the rest. Made a bracket from aluminum and clear coated it. The swim platform has a small tab I was able to drill 4 bolts to to bolt up the bracket to. Also put some silicone along the back of each of the lights to the bracket. Pretty simple and way cheaper than buying the name brand stuff for $$$ and no hull drilling. Had it on all summer so far and still works great no issues. Pics are at lake of the Ozarks.


  2. #2

    Default

    Looks nice. Good job! Where did you run the wiring harness into the boat?

  3. #3

    Default

    Quote Originally Posted by Thor View Post
    Looks nice. Good job! Where did you run the wiring harness into the boat?
    Thanks! So when I bought the boat it had been a earmark demo boat at some point and they had some old school tiny ledís ran. It comes out the boat just under the transom remote and runs to a switch panel under the dash. So canít really give too much detail on that as I didnít make it and I donít have the boat with me to check it out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •