Does anyone know what the grey silicone like coating is that Supra used on the bottom of these decks?
Does anyone know what the grey silicone like coating is that Supra used on the bottom of these decks?
Sanded out the bad fiber glass.
Put down a base coat of resin.
Sanded the bottom.
Put peanut butter around the sides to level everything out.
Re-formed the corners.
Sanded it all again.
Put resin down, sheet, more resin, seated the wood and clamped for curing.
DBD48018-6DF9-4975-8D3F-98D0F37F63C5.jpg
79667BAB-E37C-4CAE-A156-DD85DE90597B.jpg
1B4CFBD7-8556-4BC1-8AAF-22BC7A68D84A.jpg
B563486F-D505-40B5-B23A-D08FEEA147F2.jpg
89FDC3FA-69E4-49D4-8C2B-2B1DE49688E0.jpg
Last edited by Thor; 02-17-2019 at 11:26 AM.
Runners cut and thread inserts added
23A908FC-998B-4220-BCE6-3AD22255835D.jpg
Runners seated and several coats of fiberglass added
7C03DC43-8573-450E-BD7A-7F6BFD549055.jpg
A3C22C8E-4650-4976-839B-CF16318D5138.jpg
Just need to clean the pads and project done!
681A2B6C-663F-4ECF-B50D-6C514966AD02.jpg
C154FF7C-421C-4904-B1A4-E8339EAFD6B0.jpg