Results 1 to 3 of 3

Threaded View

  1. 03-17-2019, 08:38 PM #1
    DDickey
    DDickey is offline Junior Member
    Join Date
    Jan 2009
    Posts
    7

    Default Walter V Drive Warning Light Won't Go Out

    I have a 2005 22' Launch with a Walter RV 26D V Drive and the low oil pressure warning light is staying on. I've checked the wiring and it's good. Hoses are good and the unit is filled properly. I pulled the filter, and it was clean, oil was clean and not black. I pulled the pressure switch and ran the engine in gear momentarily, and the unit pumped oil out of the hole, so pump appears to be good. I tested the switch with air pressure and it doesn't switch until 18 psi, is the switch bad? I thought it was supposed to switch at 8 psi?
    Last edited by DDickey; 03-18-2019 at 09:52 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules