Alright Supra Forum....

Time has come for me to list my 89 Sunsport for sale. Many of you will remember this boat as Okie Boarder's blue Sunsport. He completed one of the most highly regarded floor/stringer rebuild on this forum and did a whole bunch of other great modifications and upgrades to the boat. I have had the boat for five enjoyable, trouble-free seasons. Boat now has 1091 hrs as of today. Only reason for upgrade is I am looking at upgrading either this fall or early spring.

For some reason the forum won't let me upload photos right now. So I am just going to post links to Google drives:

Beauty Shots:
https://drive.google.com/open?id=1Um...wSZ4-AE0BWOjXt

Stringer / Floor rebuild job:
https://drive.google.com/open?id=18r...8hhsxoX7qPDU6-

Someone please pick up this great boat or forward to any friends you have that might be looking!!

Boat features:
- Full Stringer and Floor Rebuild (circa 2011)
- Interior replacement 2009 (still very good condition)
- Aerial Wakeboard Tower
- Monster Board Racks (2 racks, 4 boards total)
- Hydrophase GPS Speed Control
- Integrated Ballast system
- Three sacks plumbed into Johnson reversible ballast puppy (800 GPH)
- All three integrated sacks hidden (400 in bow underfloor, made possible by the stringer job, 400 under the rear seat, 400 in the rear locker
- These bags all run off the same 800 GPH Johnson pump with waterflow directed by a valve manifold under drivers seat (see pics)
- All bags have thru-hull overflow vents
- Additional 4th circuit to fill a surf sack on either side
- Three amp stereo system (cockpit, tower, sub)
- New Kicker KMT tower speakers in spring 2019
- Bimini cover
- Soft boat cover (more of a dust cover, not for outdoor storage)
- LED Lighting on trailer
- Dual Batteries with Automatic Battery Separator


Since buying in 2015, I have made the following mods:
Most important - installed Hydrophase Ridesteady GPS speed control
Upgraded integrated ballast pump from Simer (400GPH) to a Johnson Ballast puppy (800GPH). Also up-sized the hose from the intake through the valve manifold from 3/4" to 1"
New Kicker KMT tower speakers (2019)
Replaced batteries (2019)
New rear seat skins and cushions for the bench - HDPE bases (no wood)
Replaced base of nose cushion back - replaced rotten wood with HDPE
Finished wet-sand and buff on port side of boat