Originally Posted by
Tonymozingo
Thanks, Michael.
One last question and I’ll stop bothering.
I bought a Holley carb to replace the old and when I mounted it, I noticed it did not have the two prongs for the pos and neg elect. Choke wires that the old one has.
Instead, it has a manual choke for which there’s no apparent connection.
Will this carb work and if so, what do I do with the two wires?
Check out a DUI distributor {Davis Unified Ignition} should be easy to install.
I think you can probably swap the choke cap from your old carb onto the new one. You need the choke with the 2 wire connections or the choke will be on all the time. The spring won't get hot unless the wires are hooked up.
agetech
89 Comp
Restored to "Better than New"