Results 1 to 3 of 3
  1. #1
    Join Date
    May 2010
    Location
    Arlington
    Posts
    2

    Default Front Seat Cushion Removal

    I have a 2003 Supra Launch and I am trying to get the front center cushion out. I removed the 4 nuts/washers from the 4 studs on the bottom of the seat (studs are still going thru fiberglass). I also removed the top front step plate to get access to front and removed the 3 screws in the front. With the 4 studs on the bottom, it makes me think the seat comes out by pulling up (tried that). Seat still seems stuck in its place. Any help with getting this darn thing out will be much appreciated. Anyone have any helpful hints?

    IMG1.jpg

    IMG2.jpg

    IMG3.jpg

    IMG4.jpg

  2. #2
    Join Date
    Aug 2019
    Location
    St. Louis , MO
    Posts
    75

    Default

    I have an 04' Launch and I was looking at pulling mine out also. Mine is shaped slightly different than yours. I do know that over time, the cushion gets stuck to the fiberglass and can be tough to break loose. Have you tried getting between the cushion and fiberglass and lightly prying on it?

  3. #3
    Join Date
    Jan 2011
    Location
    Charlotte, NC
    Posts
    41

    Default

    I have a Launch SSV so it's a bit different, but when I removed my upholstery I had to go full contortionist to get at all the fasteners. My guess would be if you pull your speakers you'll fine a fastener or two near there. If not, go find a 10 year old and have him feel around behind the seat with kid-sized arms. My guess is you've still got a few holding on.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •