Results 1 to 3 of 3

Thread: Testing motor

  1. #1
    Join Date
    Dec 2019
    Posts
    4

    Default Testing motor

    Hello I just purchased a 1992 Supra with a 351 Ford and I need to know where to hook up the water hose to try and start the motor. I've looked it over and have no clue. Thanks Sorry posted in the wrong place.
    Last edited by dblcola; 01-11-2020 at 01:02 PM.

  2. #2
    Join Date
    Dec 2015
    Location
    Lake Nottely, Blairsville, GA
    Posts
    884

    Default

    Intake is on the port side of engine next to prop shaft rear of engine beside the tranny. Usually a 90 degree connector.

    2012 Supra Sunsport 242
    1991 Supra Comp ts6m
    1983 Supra Beast
    1983 Supra Rider aka Mischief IV

  3. #3
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,558

    Default

    Just take the hose off the connector mentioned above and put it a bucket with a hose from the house running in it . Adjust the water to match the amount the engine sucks in.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •