Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1

    Question 1990 suspra sunsport-what to inspect/check first

    I have just recently purchased 1990 supra sunsport classic.
    The motor starts and runs. Sounds ok but likes to start with choke on at first...Although, I dont trust anybody when it comes to boat motors. I like to do the maintenance and service myself if I can. This boat comes with a 454 PCM motor with about 850hrs on it and my questions are as follows

    1) what problems should I be most concerned with this motor?
    2) maintenance recommendations? Ie: known issues with specific part wear.
    3) best place to find parts for the motor.

    I can tell I will have a long relationship with this boat assuming everything in the motor checks out and I look foreward to keeping the forum updated with how it goes. I'll be posting pics of before and after once I get it all cleaned up
    Thanks in advance

  2. #2
    Join Date
    Dec 2015
    Location
    Lake Nottely, Blairsville, GA
    Posts
    1,247

    Default

    Congrats on the purchase. New members can’t post pics until they have a few more posts to prevent spam. Posting pics here sucks bigly so use a third party website like Imgur.com or use the Tapatalk app.

    1. I think not winterizing the motor correctly is the number one issue people experience with inboard boats. Search for a good thread on here or YouTube to learn more.

    2. Change the oil and the impeller regularly.

    3. Visit SkiDim.com Calling them works best, have great tech support.

    1983 Supra Rider aka Mischief IV
    1983 Supra Beast
    1985 Supra Rider
    1986 Supra Sunsport Skier
    1987 Supra Marauder
    1991 Supra Comp ts6m
    2012 Supra Sunsport 242

  3. #3

    Default

    Quote Originally Posted by Mischief IV View Post
    Congrats on the purchase. New members can’t post pics until they have a few more posts to prevent spam. Posting pics here sucks bigly so use a third party website like Imgur.com or use the Tapatalk app.

    1. I think not winterizing the motor correctly is the number one issue people experience with inboard boats. Search for a good thread on here or YouTube to learn more.

    2. Change the oil and the impeller regularly.

    3. Visit SkiDim.com Calling them works best, have great tech support.
    Awesome thanks for the heads up! I've been trying to research YouTube university trying to find exactly how to replace the impeller (I'm not having any luck) since I cant view pics in here it's hard to see the photos of what other ppl are doing for a fake lake and impeller change...

  4. #4

    Default

    Anyone have a part# for the impeller kit for the 454 pcm engine? Engine code is PLM-WR-L10

  5. #5
    Join Date
    Aug 2010
    Location
    Oyama, B C , Canada
    Posts
    650

    Default

    Quote Originally Posted by Konakev View Post
    Anyone have a part# for the impeller kit for the 454 pcm engine? Engine code is PLM-WR-L10
    As Mischief IV said - - -
    Call Skiers Discount Marine
    Aka Ski Dim
    They are your best source for parts - know their stuff!
    They will also give you technical advice on how to change your impeller.
    Use them !

  6. #6

    Default

    Quote Originally Posted by crystal waters View Post
    As Mischief IV said - - -
    Call Skiers Discount Marine
    Aka Ski Dim
    They are your best source for parts - know their stuff!
    They will also give you technical advice on how to change your impeller.
    Use them !
    Awesome will do!

    Sent from my SM-N975U using Tapatalk

  7. #7

    Default

    Highly reccomend a silicon impeller. Pretty sure my backup rubber one will dryrot before the silicon one will give up.

  8. #8

    Default

    Quote Originally Posted by hoop46 View Post
    Highly reccomend a silicon impeller. Pretty sure my backup rubber one will dryrot before the silicon one will give up.
    Where can I find those?

    Sent from my SM-N975U using Tapatalk
    Last edited by michael hunter; 03-13-2020 at 08:00 AM.

  9. #9

    Default

    Well, glad this is the first thing I checked...

    Sent from my SM-N975U using Tapatalk

  10. #10

    Default

    Also, when I was removing, one of the bolts snapped on the sherwood pump. It didnt take much to snap, I dont think its seized it's probably just a severely corroded/rusted bolt. Will try to remove later today at work.

    Sent from my SM-N975U using Tapatalk

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •