Hello, thanks for any suggestions,
1999, PCM 350, TBI, no fuel.
I can dribble a little fuel into the butterflyÂ’s and it starts and runs fine.
I have to jump the starting solenoid.
It is blowing the 15amp fuse attached to the control module.
It makes a small clicking noise when I turn the key to the on position.
This started when I wrapped a bunch of weeds around the prop and shaft. I was at idle speed, the weeds immediately bogged the engine down and killed it. I cleared the weeds, it restarted once, died, and has not ran again except as described above. Been sitting for 3 years now while I completed building and moving into a new home.
I would really appreciate some help.......really want to get back on the water this year if the Coronavirus doesnÂ’t kill me.
Thanks,
Randy