Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2020
    Posts
    8

    Default Ballast resistor need or don’t need?

    So my ballast is not supplying 12v out to the coil. It’s only 6 v i have a electronic ignition. Do i need to run it? If i do is there a certain type . I heard there is different ohms. Thanks

  2. #2
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default

    It depends on what brand of electronic ignition you have . You will have to contact the manufacture to get the install instructions.

  3. #3
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default

    I have one off of a working 86 comp if you need.

  4. #4
    Join Date
    Jun 2020
    Posts
    8

    Default

    I have a Mallory distributor with a blue streak coil

  5. #5
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default

    You will have to check with Mallory on installation instructions. I like the DUI ignition system I have it on 3 of my 351w boats all run great.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •