Results 1 to 5 of 5

Threaded View

  1. 07-12-2020, 09:49 PM #1
    jkaero
    jkaero is offline Junior Member
    Join Date
    Jul 2020
    Posts
    2

    Default SL 400 Low Tower Racks 3d Printed Plug

    All,

    We just got a new SL 400 and wanted to remove the lower tower racks. We took them off easy enough but it left a nasty hole in the nice black tower. I contacts Skies Choice but they said plugs are only available for the top racks (because the lower ones are standard...dumb reason. I went ahead and created a plug than can be 3d printed and I figured I would share. Its a tight fit...ended up sanding it down a little but looks great once installed.

    Enjoy - let me know if you have questions

    BTW - First post - super excited about the boat!

    SupraPlug.JPG
    Attached Files Attached Files
    Last edited by jkaero; 07-12-2020 at 10:05 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules