Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2020
    Location
    Huntsville, AL
    Posts
    5

    Default Looking for 1989 Supra Sunsport Side Windows

    Rebuilt my 1989 Supra Sunsport...anyone have a parts boat or source for the side vent windows? I need both left and right vent windows.

  2. #2
    Join Date
    May 2021
    Posts
    1

    Default

    Quote Originally Posted by Sixtydriver View Post
    Rebuilt my 1989 Supra Sunsport...anyone have a parts boat or source for the side vent windows? I need both left and right vent windows.
    I have the same boat and need a left vent window and hardware. Did you find a source? Thx!

  3. #3
    Join Date
    May 2019
    Posts
    1

    Default

    I am also in need of a left side window for a 1989 TS6M Comp. Has anyone found a source for these? I need the glass, the metal strip along the rear edge and the T handle that attaches to the glass. Any suggestions?

  4. #4
    Join Date
    Dec 2015
    Location
    Lake Nottely, Blairsville, GA
    Posts
    975

    Default


    1983 Supra Rider
    1991 Supra Comp ts6m
    1983 Supra Beast
    1987 Supra Marauder
    2012 Supra Sunsport 242

  5. #5
    Join Date
    Dec 2016
    Location
    Louisville, KY
    Posts
    136

    Default

    Quote Originally Posted by ncts6m View Post
    I am also in need of a left side window for a 1989 TS6M Comp. Has anyone found a source for these? I need the glass, the metal strip along the rear edge and the T handle that attaches to the glass. Any suggestions?
    https://www.ebay.com/itm/254914305135


    Sent from my iPhone using Tapatalk
    '92 Comp ts6m - 5.8 PCM Pro Boss Carb
    '02 Launch SS - 5.7 Indmar Assualt TBI

  6. #6
    Join Date
    Apr 2021
    Posts
    17

    Default

    This is the product I used to replace the window vent handle. It works. However, be prepared to drill out the aluminum (thankfully) rivets that affix the original bracket to the window frame. Note that the replacement bracket does NOT line up with the existing holes, but it is close. I used self-tapping screws to affix the new bracket with great success.

    Side note, the metal retaining ring that secures the plastic "nub" to the actual window is a huge pain to get off.

    As far as replacing the window itself is concerned, you will probably have to get a local glass shop to cut you a replacement.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •