Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2014
    Location
    Lake Entiat, WA
    Posts
    26

    Default Found this near my mid drain plug...what is it?

    Not sure what this is, but would like to put it back where it belongs...



    Sent from my iPhone using Tapatalk
    2011 Supra Launch 242
    Lake Entiat, WA
    Lake Washington

  2. #2
    Join Date
    Apr 2012
    Location
    Lake Wylie NC Area
    Posts
    440

    Default

    Bilge pump intake screen
    Michael
    Mikes Liquid Audio

  3. #3
    Join Date
    Jun 2012
    Location
    Knoxville TN
    Posts
    1,415

    Default

    Yep, I think my 07 Supra had something like this. When I replaced mine, I do not recall if it had a screen that sits in the blue bottom part that clips in/out.

    https://www.bakesonline.com/bilge-pu...ra-750gph.html
    Last edited by MJHKnox; 08-14-2020 at 04:59 PM.
    2018 Supra SL400

  4. #4
    Join Date
    Jun 2012
    Location
    Knoxville TN
    Posts
    1,415

    Default

    If you unclip the pump from the bottom plastic housing, that screen sits under the main pump. You will see the hole where the water is pulled into the pump.

    I was fixing something my boat today and unclipped my center pump from the bottom of the boat. There is where the screen was sitting. Wanted to check if it was clean.

    If I were you, I would check that your bilge pump is connected properly and attached to the bottom of the boat/that bottom housing I'm referring to.
    Last edited by MJHKnox; 08-14-2020 at 05:01 PM.
    2018 Supra SL400

  5. #5
    Join Date
    Sep 2014
    Location
    Lake Entiat, WA
    Posts
    26

    Default

    Thanks! Will do...


    Sent from my iPhone using Tapatalk
    2011 Supra Launch 242
    Lake Entiat, WA
    Lake Washington

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •