87 supra sunsport overhaul

[Gaducker]

Project boat for my son. Started on it June 1st.

[Gaducker]

Pre split before I commited to pulling the floor up.

[Gaducker]

As we discussed a total tear out.

[Gaducker]

Total tear out started.

[Gaducker]

This floor was completley rotten, has anyone got any pics of the holes in the deck where the wires and cables from the wheel go under the deck and into the center engine compartment?

[Mischief IV]

This floor was completley rotten, has anyone got any pics of the holes in the deck where the wires and cables from the wheel go under the deck and into the center engine compartment?

I can take more if needed and/ or measurements for you. You have 4 holes for bow vents - 2 port and 2 starboard. Battery box that sits in-between stringers on port side with small hole for battery cables. Center hole is for cooler drain plug. Obviously, throttle, engine harness and steering cables on right side at helm. Of course, ski pylon is just front of engine box.

[Gaducker]

Mine had a 90 and a hose for the cooler drain.

[Gaducker]

I can take more if needed and/ or measurements for you. You have 4 holes for bow vents - 2 port and 2 starboard. Battery box that sits in-between stringers on port side with small hole for battery cables. Center hole is for cooler drain plug. Obviously, throttle, engine harness and steering cables on right side at helm. Of course, ski pylon is just front of engine box.

Those vents just go back into the middle of the big stringers?

[secondsupra2004]

Project boat for my son. Started on it June 1st.

Just curious, what did you pay for it? I sold my 89' last year for $3,900.00, and it was in great shape but needed new stringers. Too big a project for me. Plus, we needed a bigger boat. I miss the slalom wake of the 89' though.IMG_2365.jpg

[Gaducker]

1000 bucks with a spare engine and drive. I could find 500 dollar projects with enclosed bow but he wanted a bow rider and we could not find a bow rider for cheap.