Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 32
  1. #21

    Default





    I should have the windshield back together by the weekend and the ceramic coating is finally being applied to the boat. Iím so excited to get this home and start reassembling.


    Sent from my iPhone using Tapatalk

  2. #22

    Default

    Glass is back in the newly painted frame.





    Sent from my iPhone using Tapatalk

  3. #23
    Join Date
    May 2019
    Location
    Arizona
    Posts
    124

    Default

    Looks Awesome, itíll be better than new when your done with it.


    Sent from my iPhone using Tapatalk

  4. #24

    Default

    Quote Originally Posted by Turbinesurgeon View Post
    Looks Awesome, itíll be better than new when your done with it.


    Sent from my iPhone using Tapatalk
    It should run a lot better and not drink so much oil as well!


    Sent from my iPhone using Tapatalk

  5. #25

    Default

    Coating is done. I canít wait to see it in person. He sent me some pics while Iím out of town. And yes the fenders are removed for buffing access.





    Sent from my iPhone using Tapatalk

  6. #26

    Default

    Home at last. I had to make sure the Surf.Mode shapers would stick to the coating. I need to get the fenders back on now that heís done buffing. Thatís another days project.



    Sent from my iPhone using Tapatalk

  7. #27
    Join Date
    Dec 2015
    Location
    Lake Nottely, Blairsville, GA
    Posts
    909

    Default

    Enjoying the pics. Still very impressive.

    1983 Supra Rider
    1991 Supra Comp ts6m
    1983 Supra Beast
    2012 Supra Sunsport 242

  8. #28
    Join Date
    Jun 2020
    Location
    Weatherford TX
    Posts
    5

    Default

    Hey Brian_289... I have thoroughly enjoyed this thread! I think you've given us all a little inspiration!

    Question... How did you decided exactly where to place the decals? I am putting new decals on my 2008 Launch 21V and my OCD is stressing me out about decal placement. Did you just eyeball it or did you have predetermined measurements to work from?

  9. #29

    Default

    Quote Originally Posted by Launch21V View Post
    Hey Brian_289... I have thoroughly enjoyed this thread! I think you've given us all a little inspiration!

    Question... How did you decided exactly where to place the decals? I am putting new decals on my 2008 Launch 21V and my OCD is stressing me out about decal placement. Did you just eyeball it or did you have predetermined measurements to work from?
    I eyeballed one side. I used masking tape to hold it in place, stepped back and looked it over. Then I measured and made sure the other side ended up in the same spot.


    Update, I found the play in my shift and throttle linkage. Here I thought Iíd be buying a shifter assembly, itís just the brass fittings that thread on the cables. They slide in and lock down with a cotter pin, well they have giant slots worn in the sides of them where they connect to the shifter linkage. 8 bucks and I have new ones coming. On to rudder box rebuild, replace shift, throttle and steering cables before the engine gets home!


    Sent from my iPhone using Tapatalk

  10. #30

    Default

    I finally got my engine back from the machine shop. I was able to assemble the rotating assembly last night and check all the main and rod clearances. Back at it today. I canít wait to see this all back together.






    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •