Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2020
    Posts
    4

    Default Crankshaft Raw Water pump conversion 351w

    Hello all,
    After 2 days of searching and pinging several suggested vendors I am in need of some assistance. Looking to change my belt driven RWP with a crankshaft mounted one. Has anyone did it with a 351W? It is original on my recently purchased 1992 Supra Saltare. I think I am close to a pump but can’t find a bracket. Indmar 351W part number might be needed. Maybe someone has some pictures of what theirs looks like post conversion.
    Thanks

  2. #2
    Join Date
    Jan 2020
    Posts
    17

    Default

    I have a 92 Comp TS6M and was thinking of doing the same. Have you checked the length of the pump to see if you will have enough clearance to remove and install the impeller when your done? My boat is stowed away for the winter so I have no way to measure?
    I figured I would just have to fabricate my own bracket to?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •