Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1

    Default motor not starting after warm

    Motor not starting after warm, could this be vapor lock. It will start and run fine after it cool's off. Is there a way to stop vapor lock from happening.
    Thank you
    Mike

  2. #2
    Join Date
    Jul 2010
    Location
    N.W. Suburbs Chicago, IL
    Posts
    2,307

    Default

    More information would probably be helpful here such information like year, engine and fuel delivery method.
    '86 Comp TS6M - Reborn 2016
    Riding a HO Sports CX Ski

  3. #3
    Join Date
    Apr 2007
    Location
    Cincinnati
    Posts
    8

    Default

    Same problem. I had to add a second hi pressure fuel pump because original pump is too close to the engine and the heat vaporizes the fuel.

  4. #4
    Join Date
    Aug 2019
    Location
    St. Louis , MO
    Posts
    135

    Default

    Quote Originally Posted by bonedoc View Post
    Same problem. I had to add a second hi pressure fuel pump because original pump is too close to the engine and the heat vaporizes the fuel.
    Just curious, what year and engine do you have? Carb or fuel injection? I guess I've been lucky as my 04' hsa not had this problem. The pump is mounted on the lower back corner of the engine block.

  5. #5
    Join Date
    Jun 2012
    Location
    Knoxville TN
    Posts
    1,415

    Default

    Had vapor lock a few times during the early days of my 2007.

    Started running the blower during water activities and using 100% fuel (no eth). Solved the issue.



    Sent from my P00I using Tapatalk
    2018 Supra SL400

  6. #6
    Join Date
    Jul 2019
    Location
    Anacortes,Wa
    Posts
    14

    Default

    check your ignition coil. my 05 launch would fire up and run fine. after we ran for a while and shut down to swim and hang out, if I tried to fire back up it wouldn't fire up until I opened the engine compartment for it to cool down. I chased all this stuff these guys are saying (adding secondary fuel pump, vapor lock...blah blah) I would bet its ignition related. Hope that helps and good luck. also add marine 360 with every fill up.
    Last edited by JordanCarr20; 06-16-2021 at 03:20 PM.

  7. #7
    Join Date
    Sep 2020
    Location
    Nebraska
    Posts
    14

    Default

    I am having the same issue on my 06 Sunsport 24v with the Assault 325. What motor do you have and did you replace the ignition coil yourself? If so, where did you get the coil from?
    Last edited by Phil C; 06-17-2021 at 11:51 AM.

  8. #8
    Join Date
    Sep 2020
    Location
    Nebraska
    Posts
    14

    Default

    Quote Originally Posted by MJHKnox View Post
    Had vapor lock a few times during the early days of my 2007.

    Started running the blower during water activities and using 100% fuel (no eth). Solved the issue.



    Sent from my P00I using Tapatalk
    After getting it to start would it run rough? I was out on the water for a few hours and it was running great, parked it for an hour or so and then it wouldn't start. Got towed back, pulled it out and then it popped right off, so I put it back in the water and tried to rev it up, but it was sputtering really bad with little to no RPM change with throttle input.

    2006 Supra Sunsport 24v w/325 Indmar Assault EFI

  9. #9
    Join Date
    Jul 2019
    Location
    Anacortes,Wa
    Posts
    14

    Default

    100% sounds ignition related. my boat was a 2005 launch 24ssv I had the Indmar 340 but no cats. I replaced the coil myself. I was no where near anyone who carried Indmar parts. I went to the local auto part store in the town where we were and bought an ignition coil for a 1994 5.7 chevy pickup. I took the coil in with me and matched it. it should have a electrical plug on it as well. The coil I bought didn't have that mounting bracket on it so to get me by I used a bunch of zipties in order to make it the rest of the trip and it worked fine. when I got home I ordered a bracket off amazon that worked. I also ended up putting a brand new full distributor and plugs and wires in the boat as well. but after I changed that ignition coil I had no problems after that. my boat did exactly the same thing it would turn over and not fire but when I locked the throttle out to "pump" the throttle as I would turn it over it would eventually fire up and sound like it was running on 5 cylinders, it would sputter and eventually clear up. new ignition coil and all was good in the world. hope that helps.

  10. #10
    Join Date
    Sep 2020
    Location
    Nebraska
    Posts
    14

    Default

    Thanks for the advice! I just replaced my fuel filter and the throttle position sensor ($50 part). Fingers crossed that works. Odd thing was that my TPS is off a mid 2000s 5.3L silverado, even thou the engine in the boat is the 5.7L. I will brining the coil with me to the part store to make sure it is correct.
    TPS Part # AC Delco 19259452


    20210617_210324[1].jpg
    06 Supra Sunsport 24V w/325 MPI Assault

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •