Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2012
    Posts
    5

    Default 1992 Supra Mariah Power Tec Idle Problem

    I have a 1992 Supra Mariah Powertec 351 Windsor. I'm trying to figure out how to make it idle properly.

    What my problem is, is that when I put it in gear I lose about 500 RPM's. I'm under the impression that you're only supposed to lose about 100 RPM's.

    I have replaced all my plug wires and my plugs and fuel filter. There is not much else to replace.

    What happens when I put it in the forward gear or the reverse gear the engine starts stumbling and I have to give it more gas to keep it running.

    I was wondering if someone could help me out and direct me in the right direction of what might be causing this problem.

    The only way I can keep the engine from stumbling and running is to turn the RPMS up via the idle screw.

    Besides that the boat runs GREAT all all Speeds and Idle...

    Any help would be appreciated.

    Thanks

    Chris Richer

    Bend, ORegon

    https://forum.supraboats.com/showthr...Power+Tec+Idle

    This Guy has the same problem I have hehe
    Last edited by 100Million; 08-17-2021 at 07:56 PM.

  2. #2
    Join Date
    Oct 2012
    Posts
    5

  3. #3
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default

    You probably have a Pro Tech system. There are no more parts available anymore. Your best solution is to convert it to a DUI [Davis Unified Ignition] system very simple unless you have fuel injection.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •