87 Closed bow ts6m for parts

[h2o-ski]

By chance do you have the exhaust through hulls or exhaust tips? I need a 3" id tip to replace the poor setup on mine

Sent from my SM-G950U using Tapatalk

[Kevin1522]

93064ECE-221F-4915-B953-CC86A6A79101.jpg93064ECE-221F-4915-B953-CC86A6A79101.jpg

[Mischief IV]

By chance do you have the exhaust through hulls or exhaust tips? I need a 3" id tip to replace the poor setup on mine

You do not want to re-use those Supra traps. By design they are flawed and will let water into your boat which is why so many older Supras had rotten stringers.

You need to replace with something like this.

https://marinepartssource.com/4-exha...rs-corsa-11050

[Jetlink]

You do not want to re-use those Supra traps. By design they are flawed and will let water into your boat which is why so many older Supras had rotten stringers.

You need to replace with something like this.

https://marinepartssource.com/4-exha...rs-corsa-11050

He's right, do not waste your time with these.

[Kevin1522]

Thanks Mischief I’ll toss them then.

[h2o-ski]

Bummer those would not work. My new transom and stringers say thank you.

[etktryd]

Can I ask what the flaw was.
Thanx

[hoop46]

Any chance the vents on the bow and stern are non cracked? Snowballs chance but figured it's worth asking

[Kevin1522]

Yes I have both fronts, and 2 of the rears. Cleaned but could use a respray of satin black, flat black.

[Mischief IV]

Any chance the vents on the bow and stern are non cracked? Snowballs chance but figured it's worth asking

I may have a decent old set as well. They still make them so I replaced with all new while restoring the Comp. Same for rear vents.