Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: 85 Comp Rebuild

  1. #11
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,700

    Default

    Work continues first two stringers are made and coated with CPES yesterday I epoxied them in . Also I found the backing for the rudder was totally rotted away. So far every piece of wood in this boat is rotted and needs replacement.








  2. #12
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,700

    Default

    Finished the right side stringers epoxied them to the hull.






  3. #13
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,700

    Default

    Got the port side stringers built and installed. Next step is fillets then glass mats.






  4. #14
    Join Date
    Jun 2012
    Location
    Knoxville TN
    Posts
    1,355

    Default

    Quote Originally Posted by michael hunter View Post
    Started shaping the stringers they have to be scribed and planed to fit the hull.
    Do you have something to use to find what degree of angle to cut?
    2018 Supra SL400

  5. #15

    Red face Awesome Work

    This is really an awesome work..

    Quote Originally Posted by michael hunter View Post
    Started shaping the stringers they have to be scribed and planed to fit the hull.






  6. #16
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,700

    Default

    Quote Originally Posted by MJHKnox View Post
    Do you have something to use to find what degree of angle to cut?
    Just scribe and test fit a hundred times . I get them to fit within 1/8'' or less then epoxy them to the hull

  7. #17
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,700

    Default

    Got all the fillets done yesterday next step will be glassing them to the hull.




  8. #18
    Join Date
    Jun 2012
    Location
    Knoxville TN
    Posts
    1,355

    Default

    Quote Originally Posted by michael hunter View Post
    Just scribe and test fit a hundred times . I get them to fit within 1/8'' or less then epoxy them to the hull
    Somehow I had a feeling you were going to say that.


    Sent from my iPhone using Tapatalk
    2018 Supra SL400

  9. #19
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,700

    Default

    Stringers rapped with fiberglass mat



    Installed closed cell foam and started the deck




  10. #20
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,700

    Default

    New deck is fitted had to use 3/4'' 5/8 '' is nowhere to be found . 140.00 per sheet Lets Go Brandon. Test fit the upper hull before glassing in the floor . Fit is good but top cap will need to come back off to finish the floor. Got carpet going with navy blue instead of the black that was there should be ready for interior next week.








Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •