Results 1 to 10 of 58

Thread: 85 Comp Rebuild

Hybrid View

  1. #1
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default 85 Comp Rebuild

    Two years ago I picked up a 85 Comp with a nice hull but interior was toast and stringers and floor was the worst I have ever seen. The price was right and I was looking for another project . At the time I was about half way through a 67 Correct Craft Mustang so the comp has been on the back burner. Never Start Another Project until the first one is done. About a month ago I started the comp Gutted it removed the drive line and lifted the top cap . Since then I put the hull in the basement and started to remove foam. That is when I found the botched stringer and foam job . It looks like they were more concerned with holding up the floor than holding up the engine. I got it stripped down and started removing the hacked in stringers to get to the original stringer locations. It looked like they poured in liquid epoxy to hold the stringers down some was 2'' thick . Every thing they did was hacked in and not even close to correct. It would have been a huge problem if they had prepped the hull before pouring in the epoxy. For the most part a chisel and hammer popped the epoxy off in large chunks since it never bonded to the hull. Wife has started on interior and yes we are going with the original rainbow strips .








  2. #2
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default





    Here is the 67 Mustang

  3. #3
    Join Date
    Jul 2018
    Location
    Lafayette In.
    Posts
    61

    Default

    Awesome.... Keep the pix coming! Hope everyone had a good thanksgiving.

  4. #4
    Join Date
    Nov 2021
    Posts
    1

    Default

    The photos are awesome! It is a huge effort. You are truly an inspiration.

  5. #5
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default

    Wife has started the upholstery. We are going with the original rainbow color theme.








  6. #6
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default

    Work continues on the stringers . I got one side removed and hull sanded down to install the new stringers. All the backings for the swim platform and the rudder are rotted out more cutting and installing new wood.





    Rudder backing rotted

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •