IMG_0321.jpgIMG_0322.jpgIMG_0323.jpgIMG_0324.jpgIMG_0320.jpg
The finishing cap has an internal height of 1.554", and in the top of that there is a small cut out that is .375" deep, where the internal depth is 1.270". The depth of the bottom ledge of the current rub rail is .208", the fiberglass depth of the top cap at the seam is .211". Top cap height to current rub rail top is .930", from the bottom edge of the top cap to the bottom of the rub rail is .530". I don't know if the overall height of the rub rail installed matters much, but it is 1.54" tall. Like I said, this rail is clearly not correct and doesn't match the contour of the Supra finishing cap right above the transom light.
Any help you may provide for what rub rail I need to look for would be immensely helpful. Thank you. It may be this one here, but I'm not positive. I reached out to them to see if I can purchase a small sample before ordering what they show to fit.
https://www.integritymarinecorp.com/supra