You have any pics of Santera without rubrail?
You have any pics of Santera without rubrail?
1983 Supra Rider aka Mischief IV
1983 Supra Beast
1985 Supra Rider
1986 Supra Sunsport Skier
1987 Supra Marauder
1991 Supra Comp ts6m
2012 Supra Sunsport 242
No but I can go out and take the finishing piece off the stern and take one side up to take measurements and pics.
IMG_0321.jpgIMG_0322.jpgIMG_0323.jpgIMG_0324.jpgIMG_0320.jpg
The finishing cap has an internal height of 1.554", and in the top of that there is a small cut out that is .375" deep, where the internal depth is 1.270". The depth of the bottom ledge of the current rub rail is .208", the fiberglass depth of the top cap at the seam is .211". Top cap height to current rub rail top is .930", from the bottom edge of the top cap to the bottom of the rub rail is .530". I don't know if the overall height of the rub rail installed matters much, but it is 1.54" tall. Like I said, this rail is clearly not correct and doesn't match the contour of the Supra finishing cap right above the transom light.
Any help you may provide for what rub rail I need to look for would be immensely helpful. Thank you. It may be this one here, but I'm not positive. I reached out to them to see if I can purchase a small sample before ordering what they show to fit.
https://www.integritymarinecorp.com/supra
Last edited by nick 55; 02-02-2023 at 07:13 PM.
It appears five or six of those pics are the metal end cap to where the rub terminates on the stern. I'm not sure you're gonna find a replacement for it. Best to polish it (or paint it) and let it be unless you have a shop to duplicate but it looks in good shape. The kit comes with end caps that are completely different so they are useless. I may have an unused end cap from one of my spare boats but don't hold me to it.
This is what I recommended...check those specs though against yours though since I didn't see overall height from your pics. I ordered off of eBay from a marina out of Florida. It is 50 feet in total length. Can't remember what I paid for it.
2nd OPTION. They have this in black with chrome which is what I have on my Rider but do not have the number for it. See pic below.
This shows frosty white number which you probably don't want. Just showing you the specs are a bit different than rubrail above.
Hope this helps. I'm going to be out of town the next week so will check back later.
1983 Supra Rider aka Mischief IV
1983 Supra Beast
1985 Supra Rider
1986 Supra Sunsport Skier
1987 Supra Marauder
1991 Supra Comp ts6m
2012 Supra Sunsport 242
Thanks, this helps me with what shape I think I need.