Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 90 Comp rebuild

  1. #1
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

    Default 90 Comp rebuild

    The rebuild has begun. This is 7 hours of work after the cup was pulled.20230203_095024.jpg90 comp first picture of the rebuild.jpg My plan is to get the glass work finished in one of the new home garages we are building while the weather is warm. Also keep all of fiberglass mess away from the wife. Put to cap back on and save the rest for a winter project.

  2. #2
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

    Default

    Progress has been made. Fresh stringer are installed and plywood floor is cut out and ready. I still need to glass in the ends of the stringers20230817_082958.jpg 20230817_083015.jpg

  3. #3
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

    Default

    20230818_130148.jpgI'm ditching the rubber mufflers & plastic through hull exhaust fittings. They are being replaced with 3" exhaust tubing and stainless through 20160305_192132.jpghull fittings. For the muffling there will be the guts from 2- 36" glass packs. The last owner got the exhaust a little hot at some time.

  4. #4
    Join Date
    Aug 2010
    Location
    NJ
    Posts
    1,394

    Default

    Progress is progress, looking good. i enjoy stringer threads since it's in my future.

  5. #5

    Default

    Ditching the nylon through hulls is, in my opinion, one of the best upgrades an older Supra owner can do.

    See my list in the Supra contest, General Chat from 10-10-2022. The failure almost sunk my boat.




  6. #6
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

    Default

    What did it do to the rubber mufflers?

  7. #7
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

    Default

    20230724_165734.jpgI'm doing this build in the garage of a new home we are building in a upper scale retirement community. It's giving all of the retirees something to talk about on there morning walks. Lots of looks and ??? I took the boat home last week. Now they are asking where it's and they want me to bring it back so that can see it when It's finished. I think I'll bring it back when
    I'm finished and set it in the front yard for a cupule mornings.

  8. #8
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

    Default

    20230819_114047.jpgGlassing the edges of the floor. The blue is some really good left over 1/2" plywood from a job.

  9. #9
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

  10. #10
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

    Default

    20230825_144954.jpg20230828_131454.jpgThe floor is glassed in one layer on the bottom and 2 layers n the top. The carpet went in on a Sunday afternoon.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •