Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    Nov 2002
    Location
    TX
    Posts
    122

    Default

    Knute, when you put in 3 ropes, how far down do you tighten the packing nut? If it goes down most of the threads, I would put in a fourth. Over the season, I tend to tighten the nut a little as I see the water drip increase. Then replace as needed.
    H2Oman
    06 24SSV GG

  2. #2
    Join Date
    Sep 2008
    Location
    Parkersburg, WV
    Posts
    1,940

    Default

    If you continue to have problems, you might want to check out a mechanical seal. My boat had a PSS shaft seal (no packing) when I bought it last year. I don't know when it was installed, but I'm guessing that it's at least 6 or 8 years old and it still works great. Never a drop of water around the shaft log.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •