Results 1 to 10 of 31

Hybrid View

  1. #1
    Join Date
    Jun 2008
    Location
    Irmo, SC
    Posts
    7

    Default

    I have an 88 comp and i use two 500 fat sacs on either side of the motor box. Then i set the wake plate to about half way. With the plate all the way up the wake has too much shape. The extra 1000 pounds is a lot but not bad to drive if all you are doing is wakeboarding. It's the best wake i can come up with.

  2. #2
    Join Date
    Aug 2008
    Location
    Ontario
    Posts
    2,159

    Default

    Yeah I put my wake plate all the way up and the boat really doesn't handle as well (in chop). Going to try it at half up and see......What amazes me is how you can go from a dead flat slalom wake to a fairly decent wakeboard wake with these boats.....
    I've yet to make a huge wake, but I'm happy with it nevertheless....
    Like the sounds of the 2 5 hundo sac's, think'in that's my next move....
    90 Conbrio

  3. #3
    Join Date
    Apr 2009
    Location
    Rogers AR
    Posts
    68

    Default

    Anyone have any pics of the wake behind a comp ? I've been contemplating on getting one for wakeskating
    Go Balls Deep Or Go Home ! ! !

  4. #4
    Join Date
    Aug 2008
    Location
    Ontario
    Posts
    2,159

    Default

    Quote Originally Posted by Montgomery View Post
    Anyone have any pics of the wake behind a comp ? I've been contemplating on getting one for wakeskating
    Hopefully the link below works......this was taken while weighted about 750 lb in the back of my Conbrio including people! ....
    Probably room for another 500 lb's back there before you're too low...

    https://forum.supraboats.com/showthr...?t=4334&page=2
    90 Conbrio

  5. #5
    Join Date
    Apr 2009
    Location
    Rogers AR
    Posts
    68

    Default

    Sweet thanks Just what I was looking for
    Go Balls Deep Or Go Home ! ! !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •