Quote Originally Posted by Okie Boarder View Post
Chat,

If you still can do it, think about adding a layer of glass to the underside. I was told the plywood likes to "check" and the glass on the bottom helps with that long term. I just used a 4 oz glass cloth.

dshaff,

This was one issue I ran into. Be prepared the top won't fit down exactly like it did. I stillhad plent of material at the mating area so I just drilled new holes to put everything back together and I'm going to shift my rub rail to cover it.
Ill check into the glass on the bottom side. I have had conflicting info from different people on that underside. I have had two marina's that do floor work and Chris say not to fiberglass the bottom so that any moisture can escape. Supposedly the fir is also supposed to be better at allowing moisture to escape...but what do I know...I sell 401k plans for a living.