I finally got around to trying to install the tower. The backside of where I was going to put my backing plates is not flat like it is on the outside of the hull. And I am not sure how I am going to get in there to install the backing plate on the drivers side front. I guess I will have to take the drivers seat out to even get in there to see.
I was thinking I would put some thick epoxy between the backing plates and the hull to fill the gap so I dont stress the hull.
Supra Comp TS6M- DIYWake tower powdercoated black, custom graphics (by me), soon to have a gt40p top end swap including EFI from 2000 Explorer- with lower intake from 351 Lightning. All controlled by Megasquirt and speed density tuned by myself.