I was thinking about removing the MUffler on my 92 Comp and just puting the hoses straight down. Has anyone done this? Would it have any ill effects on my protec ignition? (I heard these ignition systems were very temperamental)
I was thinking about removing the MUffler on my 92 Comp and just puting the hoses straight down. Has anyone done this? Would it have any ill effects on my protec ignition? (I heard these ignition systems were very temperamental)
when i first my comp it didnt have mufflers ran it a year with no problems . I put the mufflers back on it sounded awesome but got loud and annoying to me so I put the mufflers back in
Take a look at csuggs rebuild thread and you can see how Jim at Viper did his. You should be able to just buy some good exhaust hose from someplace like Discount Inboard Marine and put it in place of the mufflers.
I am going to be replacing my fiberglass mufflers on my 96 ts6m comp. With stainless silencers. And new hose. Does anyone know if there is enough flexability in those short 3 1/2 hoses to get the silencers in. Or will I have to remove the risers to get new hoses and silencers installed.
Chauncey 2000 Malibu Response LX Monsoon 325
Here is a picture of what I am going to go with.
Chauncey 2000 Malibu Response LX Monsoon 325