So I finally got fairly caught up in the shop and dug my boat out today. Backed it into the center and got it ready for a long road trip tomorrow. It's going back to the dealer to have some issues resolved and the new Jabsco ballast system. I'm having them do 4 pumps. The extra one will be for external sacs with a long hose to place it on the seats, or a quick disconnect on a wall in the floorboard.
Pete at Smoothwatersports had posted on here about selling the Fulton F2 jack with a plate that matches up to the Boatmate trailers. I think I paid around $150 shipped for everything, which is about $40-$50 higher then you can find the jack for, but I got the plate and supported a small business, so to me it was worth it. Anyone thinking about doing this should hit him up. I got it pretty quick and the plate was perfect. I didn't paint it, I'll do that later. I was limited on time today. The install took about 30 minutes start to finish.
Original jack
Had to trim the stud off for the plate to fit
Plate installed
Double-posting since there's a 4-image limit.