Results 1 to 10 of 35

Hybrid View

  1. #1
    Join Date
    Apr 2009
    Location
    Prior Lake, MN
    Posts
    24

    Default '87 Comp TS6m Restoration

    Plan to document my boat overhaul. Boat is originally purchased by PO in MA. I bought it from PO in '96. Since then it has primarily been used in MN with one year in FL. It's been with me through my 20's & 30's and from bachelorhood to 2 kids. Lots of good & funny memories, so I'm going to dive in over my head and hope for the best when I'm done. I've enjoyed the threads from many of you in similiar situations (Okie, Sybr, mike, Rigr etc.) I'll do my best to document as I go along. More to come...

  2. #2
    Join Date
    Feb 2009
    Location
    Minneapolis, MN
    Posts
    3,112

    Default

    Glad to have another MN neighbor!
    --WakeMikeys 1987 Supra SunSport--
    Thread - https://forum.supraboats.com/showthread.php?t=3630
    Photo Gallery - http://photos.wakeboarder.com/showga.../35518/cat/500
    Videos - http://www.vimeo.com/user2034462/videos
    Follow me on Twitter @WakeMikey

  3. #3
    Join Date
    Apr 2009
    Location
    Prior Lake, MN
    Posts
    24

    Default Step one: Getting past denial

    Mikey...Neighbors indeed, I've enjoyed reading your posts so thanks for doing that.

    I had hoped that my two soft spots could simply be patched. I removed the carpet and cut away the floor. It has now become apparent at minimum I need to get the soggy foam out and assess the stringers. This means I'll need to at least take out the entire floor from drivers seat back. I'm hoping that my closed bow will save me some work in front of the drivers seat as that area appears mint on the top-side. While I'm at it, I plan to upgrade the following...

    - 18' steering cable package
    - Fuel pump & lines
    - 3" blowers and vent lines
    - Stereo
    - Remove pylon/skylon and install rack
    - Convert rear ski locker to a beverage cooler
    Attached Images Attached Images

  4. #4
    Join Date
    Feb 2009
    Location
    Edmond, OK
    Posts
    2,508

    Default

    One thing I noticed with mine and I'm sure others can attest to is that the stringers and cross supports were soaking wet even in areas where there was no evidence of water pooling. The wood wicks the water from other areas. If you find that the stringers are questionable, pull the cap and do it right...rip all the old stuff out.

  5. #5
    Join Date
    Feb 2009
    Location
    Minneapolis, MN
    Posts
    3,112

    Default

    Oh man that really sucks - how big were the soft spots before you opened her up? Oakie you're gonna give me nightmares...
    --WakeMikeys 1987 Supra SunSport--
    Thread - https://forum.supraboats.com/showthread.php?t=3630
    Photo Gallery - http://photos.wakeboarder.com/showga.../35518/cat/500
    Videos - http://www.vimeo.com/user2034462/videos
    Follow me on Twitter @WakeMikey

  6. #6
    Join Date
    Aug 2009
    Posts
    651

    Default

    Quote Originally Posted by 87SunSportMikeyD View Post
    Oh man that really sucks - how big were the soft spots before you opened her up? Oakie you're gonna give me nightmares...
    To be honest, Id bet that there isn't a pre 90's supra that doesn't have stringer rot!

  7. #7
    Join Date
    Apr 2009
    Location
    Prior Lake, MN
    Posts
    24

    Default

    Quote Originally Posted by 87SunSportMikeyD View Post
    Oh man that really sucks - how big were the soft spots before you opened her up? Oakie you're gonna give me nightmares...
    Two summers ago I first noticed one the size of silver dollar at the feet of the passenger seat. This last summer it had grown to frisbee sized and I found a second near the back seat the size of a silver dollar. I'm going out right now for ~2 hrs to cut more floor out and start to get a better feel for how compromised the stringers are.

  8. #8
    Join Date
    Mar 2011
    Posts
    3

    Default

    Glad to have another MN neighbor!

  9. #9
    Join Date
    Apr 2009
    Location
    Prior Lake, MN
    Posts
    24

    Default

    Sold for $1750, I've got a 2001 Tige that I'm very happy with so far.

    ngavdba - Everyone's entitled to their own opinion and you certainly have yours. I believe there's good *free* DIY documentation on the process of dismantling a boat in this thread. Don't hold your breath on the new owner documenting the ending, especially with viewpoints like yours.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •