I need to re-carpet my trailer. Is there anything I should know before doing this. Do i just cut the carpet and staple it on the wood? Am I supposed to use a glue as well?
I need to re-carpet my trailer. Is there anything I should know before doing this. Do i just cut the carpet and staple it on the wood? Am I supposed to use a glue as well?
88 Supra Comp ts6m
I just did mine. You dont need glue, factory doesnt. I would recomend stainless steel staples. It is quite easy and straight forward. Look for rusted bolts etc while replacing carpet. Good time to replace.
SI, did you use locally available material or did you order marine specific material already cut to standard bunk width? What did this project cost you in materials and time if you don't mind me asking?
2005 22 SSV GG
Heres where I got mine. It was the best price at the time on Ebay http://stores.ebay.com/boatcarpetsales
Chauncey 2000 Malibu Response LX Monsoon 325
go to the boatmate web site they sell parts, plus it is a good resource site
If you're bunks are wooden....I used a couple extra coats of End Coat preservative on mine b4 I recarpeted...I wanted the bunks to out live me!!!!!!
90 Conbrio
I used boat specific carpet. It is the same as a outdoor carpet, nothing special.
Just wanted to re-iterate the stainless steel staples. They stay wet for a long time due to the carpet, and regular ones will begin the rust immediately. Make sure and use stainless or you will be re-stapling about once a year or so.
2008 Sunsport 22 V