Results 1 to 4 of 4
  1. #1
    Join Date
    May 2009
    Location
    Back to Dallas!
    Posts
    1,845

    Default Floor/Carpet question.

    Hi everyone! Im cutting new floor insert pieces (the removable pcs of the floor)and adding carpet to them. The question is how much of a gap (where the floor and floor insert meet) do I leave to allow the carper to fold under on both sides. ?? 1/4"? 1/8"?? Thanks Jet! Yes Im still alive.
    89' Comp rebuild thread:
    https://www.facebook.com/andrewjetm/...1923456&type=3

    89' Comp Mod's and fun pic's:
    https://www.facebook.com/andrewjetm/...6666464&type=3

    89' Supra/Custom Tower & Interior/Swivel Racks
    4 Blade-14X14/1600 lbs Ballast
    Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
    JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub

  2. #2
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default

    Your Facebook pics don't work.

  3. #3
    Join Date
    May 2009
    Location
    Back to Dallas!
    Posts
    1,845

    Default

    Now they do. Hows it going michael!
    89' Comp rebuild thread:
    https://www.facebook.com/andrewjetm/...1923456&type=3

    89' Comp Mod's and fun pic's:
    https://www.facebook.com/andrewjetm/...6666464&type=3

    89' Supra/Custom Tower & Interior/Swivel Racks
    4 Blade-14X14/1600 lbs Ballast
    Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
    JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub

  4. #4
    Join Date
    Jun 2010
    Location
    Oregon
    Posts
    328

    Default

    I think I cut my ply about a 1/4" narrow measuring from the carpet with a 1/8" Router edge. I also shave an 1/8" from the bottom of the plywood to make the floor level because of the thickness of the carpet on the bottom side.
    Last edited by Hagman; 01-06-2020 at 01:48 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •