I am replacing my ski locker cover. Do I need to use marine grade plywood or can I use regular hardwood plywood and seal it. If sealing regular plywood is an option, what would the best product to use for that be? Thanks for your help.
I am replacing my ski locker cover. Do I need to use marine grade plywood or can I use regular hardwood plywood and seal it. If sealing regular plywood is an option, what would the best product to use for that be? Thanks for your help.
No reason why you couldn't use regular plywood and seal it. CPES is a very good option. A couple coats of that would probably be even better than marine grade IMO.
Where can you get cpec and bulk fiber glass resin. My big boat stores have gone out of business?
89' Comp rebuild thread:
https://www.facebook.com/andrewjetm/...1923456&type=3
89' Comp Mod's and fun pic's:
https://www.facebook.com/andrewjetm/...6666464&type=3
89' Supra/Custom Tower & Interior/Swivel Racks
4 Blade-14X14/1600 lbs Ballast
Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub
CPES: www.rotdoctor.com
Resin and Glass: www.uscomposites.com
Ditto to the ditto, The factory used regular ply and it's held up this long, CPES is the ultimate coater....
90 Conbrio