Results 1 to 10 of 10
  1. #1
    Join Date
    Apr 2011
    Location
    waco tx
    Posts
    6

    Post 1995 Supra Comp TSM6 TLC

    Hello everyone, this is my first time to join a forum.

    Ive been looking around on this site, and i can see that here is prety helpfull.

    I just bought a 1995 comp TSM6, and it needs a little TLC.

    I want to start by cleaning up the gel coat.

    Its not to bad, but it is prety oxidized.

    What could you recomend ?
    Last edited by JJ1182; 04-26-2011 at 09:46 PM.

  2. #2
    Join Date
    Feb 2011
    Location
    Tahlequah, OK
    Posts
    35

    Default

    I just got finished buffing my gel coat and am pleased with how the color came back. I used 3m products from O'reilly's. Super Duty Rubbing Compound #05954 is the gritty compund I used, then 05973 was the polishing. Be sure to keep your pad wet w/ compund. You don't want to get the surface too hot. It's a workout so get ready to wear your arms out! I did my whole boat in about 5 hours, inside and out. There are some pics @ this link.

    http://s1189.photobucket.com/albums/...lake_carlisle/
    Good luck!
    b
    Last edited by smoothfootn; 04-27-2011 at 10:18 AM.

  3. #3
    Join Date
    May 2009
    Location
    Back to Dallas!
    Posts
    1,845

    Default

    I would go ahead and wetsand and bring it back to showroom condition. Plus it will get you in shape for boarding. lol
    89' Comp rebuild thread:
    https://www.facebook.com/andrewjetm/...1923456&type=3

    89' Comp Mod's and fun pic's:
    https://www.facebook.com/andrewjetm/...6666464&type=3

    89' Supra/Custom Tower & Interior/Swivel Racks
    4 Blade-14X14/1600 lbs Ballast
    Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
    JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub

  4. #4
    Join Date
    Apr 2011
    Location
    waco tx
    Posts
    6

    Default

    thanks. If i wet sand. Where is a good grit to start?
    and jet. is the large sun deck on you boat original or did you add it?

  5. #5
    Join Date
    Aug 2009
    Location
    NW Houston
    Posts
    1,330

    Default

    Sharp looking Comp, but I can't tell if it's dark blue or black. Regardless, the dark colors are harder to bring back so I'd definitely start with a wet sand. You can comfortably start at 1000 or 800 grit. My Saltare was severely neglected and oxidized to the point the black looked blue. I finally had to drop down to 600 (even 400 carefully in some places) before I could get down to true black. I stuck with 1000 & 800 for the light bone color.

    Follow with a good compound on a rotary buffer with wool pad, then polish with buffer and foam pad, finish with a good hand wax. I won't lie, it's a lot of work to do it right, but amazed at what can be brought back.
    _______________89 Saltare Resto Project___________
    _________Then________________________Now_____

  6. #6
    Join Date
    May 2009
    Location
    Back to Dallas!
    Posts
    1,845

    Default

    Its all custom..DIY. fat sac holder/ice chest/sundeck w/leds & gas shocks and now the back hatch opens inside the boat instead of to the platform. Its the best idea stolen from mastercraft on the X7 model. Now plenty of seating, it holds 700ish lbs, the girls can lay out and lots of storage if im not weighting her down. Its just like a v-drive now. lol
    89' Comp rebuild thread:
    https://www.facebook.com/andrewjetm/...1923456&type=3

    89' Comp Mod's and fun pic's:
    https://www.facebook.com/andrewjetm/...6666464&type=3

    89' Supra/Custom Tower & Interior/Swivel Racks
    4 Blade-14X14/1600 lbs Ballast
    Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
    JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub

  7. #7
    Join Date
    Apr 2011
    Location
    waco tx
    Posts
    6

    Default

    Thanks guy's. I now Know where to start this weekend. I will post some before and after pics. by the way, if there is anyone you know needing some fuel injectors for there 5.8HO. part munber 250r-51aa. i have 3 that are still good. i just got done converting to the new style injectors.

  8. #8
    Join Date
    Apr 2011
    Location
    waco tx
    Posts
    6

    Default


  9. #9
    Join Date
    Apr 2011
    Location
    waco tx
    Posts
    6

    Default

    i wanted to see what a good compund would do first .you cant reallly tell the diffrence in the photo on the white. but if you look at the blue you can tell .in person the white has a dull dry look. just hitting it with compound and some good wax brought it back to life. i didnt get to finish the hole boat. about to hours after i took this pitchure, it started to rain. i cant wait to get the sides done. they need it bad.

  10. #10
    Join Date
    Mar 2010
    Location
    Windsor, Ontario
    Posts
    1,129

    Default

    Get some 1500 / 2000 wet for the sides. The results will be faster and last much longer. I would do the whole side with 1500 then 2000 grit. Follow with compound , swirl remover and finish with a spray wax.

    2003 Supra Launch " Gravity Games Edition"
    Dodge ram CTD tow vehicles....

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •