Results 1 to 7 of 7
  1. #1
    Join Date
    Jul 2009
    Posts
    148

    Default Locate an exit exhaust gasket for saltare?

    Hello everyone. So the exit exhaust gasket on the transom needs to be replaced on my 87 salt are? Any ideas?

  2. #2
    Join Date
    Apr 2002
    Location
    Austin
    Posts
    2,164

    Default

    transom gasket?....for your supra trapps or flappers?

  3. #3
    Join Date
    Sep 2004
    Location
    Hudson, WI
    Posts
    2,651

    Default

    Black RTV is what I used. Several times.
    Former owner of a 1987 Supra Saltare. Current owner of a Malibu 23LSV.

  4. #4
    Join Date
    Jul 2009
    Posts
    148

    Default this gasket...


  5. #5
    Join Date
    Sep 2004
    Location
    Hudson, WI
    Posts
    2,651

    Default

    Yes. Pull off that last metal flange. Wire wheel it or grind off all the old debris (be careful about not getting too crazy.) Use Black RTV or 3M 4200 to seal.
    Former owner of a 1987 Supra Saltare. Current owner of a Malibu 23LSV.

  6. #6
    Join Date
    Jul 2009
    Posts
    148

    Default

    Wow Wotan...SkiDim told me to use 3M 5200 but didn't explain anything to me. THank you very much for the advice. I will do.

  7. #7
    Join Date
    Aug 2010
    Location
    NJ
    Posts
    1,393

    Default

    My preference would be 5200 for anything below the waterline. I'm sure it's a bitch to get off if you need to, but if you're not planning on pulling it apart any time soon I'd do 5200.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •