Results 1 to 3 of 3

Thread: Wakeplate....

  1. #1
    Join Date
    Sep 2009
    Location
    Cookeville, TN (between Center Hill and Dale Hollow)
    Posts
    332

    Default Wakeplate....

    Quit working. Makes no sound at all. Everything else works ok. Any ideas?

  2. #2
    Join Date
    Feb 2011
    Posts
    183

    Default

    Obvious, but you checked all the fuses/breakers?
    2009 21V

  3. #3

    Default

    There are relays next to the Hydraulic fluid box. I had them go bad on my 07 21v a few years ago. If your fuses are good I would start their.

    you can hook up a meter to the input of the wiring harness and have someone activate the trim and see if the signal is getting to the relay module, and you can do the same on the output.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •