Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2011
    Location
    Plymouth, Minnesota
    Posts
    5

    Default Have question regarding Electronic Ignition Conversion

    I have recently purchased an 87 Supra Comp ts6m and was told it was converted to electronic ignition. I am trying to buy a cap/rotor/coil for a tune up and am wondering if anyone can tell me what the correct parts/part numbers I would need from Skidim? There are a few choices and I want to make sure I get the right ones.

    I thank you in advance for your help and support.

    Kind Regards,

    Bryan
    Bryan Malmquist
    1987 Supra Comp ts6m

  2. #2
    Join Date
    Aug 2011
    Location
    Plymouth, Minnesota
    Posts
    5

    Default

    Sorry, it has the PCM 351 engine (not sure if all 87's did or not).
    Bryan Malmquist
    1987 Supra Comp ts6m

  3. #3
    Join Date
    Jul 2007
    Location
    Flowery Branch Georgia
    Posts
    2,742

    Default

    Do you have a Prestolite or Mallory distributor? Is the cap screwed down or does it use clips? Pics would help a lot.

  4. #4
    Join Date
    May 2009
    Location
    Orange County, CA
    Posts
    65

    Default

    It sounds like you're not even sure if your points were replaced by a conversion kit. Pull the cap off the distributor and see what you've got, then call SkiDIM and let them tell you what you need. The Mallory conversion kit I used a few years ago retained the stock cap.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •