I started my carb rebuild today. What's the trick to removing residual gasket material?
I started my carb rebuild today. What's the trick to removing residual gasket material?
gasket scraper or razor blade for the thick stuff. For what's left I use a line sander everywhere that I can, if ensures a good flat surface. Wherever I can't get a line sander I'll use a soft wire brush on a die grinder at lower RPM. If you don't have air, sandpaper and an assortment of brushes will get it done.
Soak in acetone to soften, then scrape with razor blade.
Rick Ludtke
1990 Supra Pirata
1987 Supra Comp TS6M
Photo Album https://forum.supraboats.com/album.php?albumid=4