I have a 91 Supra Marauder. I found a BB sized hole in the gel coat about 18" above where the water line would be about 3 ft back from the bow. My guess is a stone or small rock kicked up when I was trailering it. On previous fiberglass boats this usually would have been a nick or a gouge. I am not familiar with Kevlar or how Supra layers its hulls. I was suprised that it got a hole and how thin the gel coat layer was. It also doesn't appear I can get at the hole from the back side. Any ideas on how to fill it without making a patch. I really don't want to patch it since it is so small.

Thanks,
Steve