Quote Originally Posted by Sluggo View Post
In my 05 I had to remove the front and rear carpeted panels and supports, but the 750's fill nicely with that extra room. I don't have a shower though. I also don't use my originals for added weight yet and still get a pretty decent wave. Especially with 4-5 passengers.

I would love to see more detailed pictures of the LED installs if you have time. I am curious how the one is wired through the carpeted support for the side bench. In my boat, that support is attached to the rear bench and folds up against it when the bench moves forward and converts to rear facing seating. I am also curious on how the LEDs in the vents are mounted and how you got to the front ones to mount anything, man is it tight up there. TIA.
Nice boat Sluggo, The carpeted support for the back seat on the passenger side is wired with a two pin wiring harness so it can be disconnected easily. As far as the ones in the vents, they are very easy. I used the flat LED's in the link below. I used two in each vent to really brighten them up. Just have to drill a small hole anywhere there is a light for wiring. I would try to post a pic of the vents, but it is so hard to see the LED's up in there. I will post a pic of what the courtesy lights look like when I get a pic of them in the daytime. It is tight in the vents but the lights I used do work well. Try this link where you can purchase them:
http://www.aixizcycles.com/id2.html