1998 Supra Comp will turn over but will not start. Need help!!

[Greg Parker]

I have replaced the coil and the ignition module on the distributor. I have also used a meter to troubleshoot why engine will not start. I am getting plenty of fuel in the carburator so I know it is not a fueling issue. It is definitely a firing problem. The engine turns over but will not start. It seems that the distributor may need to be replaced. I want to be sure that the distributor is the problem before I commit to purchasing a new one. Using a tester it seems that I am not getting a pulse on the distributor. Any other ideas or suggestions on troubleshooting?

[wotan2525]

What kind of distributor? What engine?

[garyholl]

Did you check and wiggle the safety lanyard by the drivers seat? Is it firmly in neutral?

[Greg Parker]

It is a pulse generator distributor. The engine is a 1998 Chevrolet 350 small block.

[Greg Parker]

I have checked the safety lanyard and made sure throttle was in neutral.

[lively]

So what have you verified ? Fuel , spark , compression ?

Check your coil / coils

[Greg Parker]

I know it is not fuel problem. It is definitely a firing issue. I have just recently replaced the coil and even replaced the ignition module on the distributor. I want to make sure the distributor is the problem before a buy another.

[lively]

Is the coil external from the dizzy ? Or what ? Have you verified power 12vdc to coil ?

[Supra-in-steamboat]

What was the original problem that caused you to replace your dizz ignition module and coil?

[lively]

I think it wouldn't start ? Idk