Quote Originally Posted by lmnelson86 View Post
I searched and searched for 1988 Supra Mariah info a few months back when I started my project to no avail. Glad to see someone else tackling the same exact boat. I suspect you've read through my thread as well. I was in the same position as you, do a partial restoration or do the full cap off resto. Cap off is the only way to go, and removing the top was actually the easiest thing I have done on this whole project. Don't forget to tackle the transom while you're at it. Even if it is decent/OK, it is an easy fix. No sense in removing the cap and not replacing the transom while you're at it.

I am interested to see how your project turns out. If you have any questions, feel free to PM me since I am doing the same exact thing, but a few months ahead. Good Luck! Take toins of pics!
Thanks man! I have to admit I was kind of excited to see your thread. I should have the deck off this weekend and remove the floors. My plan is to manually digitize the stringers and floors in CAD so that it can be cut on the 3 Axis and have it for anyone else that may be interested. I am a design engineer and I have access to a CNC 3 Axis router with a vacuum table. I am a better designer than a woodworker...plus I am all about contributing to the group.