Results 1 to 10 of 205

Threaded View

  1. #16
    Join Date
    Aug 2014
    Location
    Orlando, FL
    Posts
    219

    Default

    Quote Originally Posted by lmnelson86 View Post
    I thought about fiberglassing the back side of the hull where all the holes are, so I have fresh material to screw into. Maybe I will still do that before I put her back together. It cant hurt...maybe Ill go pick up some fiberglass tape today.
    Fiberglass itself don't hold screws very well which is why they use alot of rivets. Trevira looks and feels similar to a thick felt and hardens like a thin piece of wood when soaked in resin. If I didn't have access to the trevira I would resin coat a test piece of felt from the fabric store. Let it cure and drive a screw in it. I would imagine it would a have the same effect.

    Last edited by flipz96; 03-11-2015 at 10:16 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •