So yesterday we were out for the boats maiden voyage on the lake. Everything seemed to be fine, the carb would load up at idle so I knew I needed to adjust the carb. Had fun otherwise.
When we got back to the launch ramp and pulled the boat out I noticed we had taken on what seemed like an enormous amount of water. The bilge never kicked in on auto and the manual wasn't working. No big deal I'll fix it.
So today I go with the vacuum guage and go to tune the carb with the boat in the water with it on the trailer. I pulled the dog house, rear seat and rear cover over drive Shaft so I could see everything. So I get the carb tuned, and notice water coming in fast in the bilge area but it's coming from the drivers side stringer under the floorboard where the plastic foot rest it. It's coming out of a chrome tube and it's flowing pretty good. I finally realize that it must be an exhaust leak and it's filling the drivers side stringer with a ton of water. I did notice that the drivers side seemed a little heavy yesterday but figured it must have been my big lunch.
Now my question is I got home and tore the back seat out. I see the gas tank which is full of fuel and a plastic looking black box underneath it. That black box is surrounded by water. Can anyone guess what my problem could be.
The water is trapped in the stringer and not leaking back out of the boat where the exhaust comes out of the transom so I can assume I'm not taking on water there and that it muse be from the exhaust. Any help would be appreciated.
It's hard to see in the photo but that's the black box surrounded by water.