Quote Originally Posted by scottschmitt View Post
Is there a way to fine tune steering wheel position without undoing the bolts that attach the cable to the rudder? Just undo, slide, check, repeat?
Yes, there is. If you unbolt the three bolts that hold the steering "column" to the round steering rack, you can clock it accordingly. First simply spin your hub fully in each direction, and note the center. Also check that the rudder is centered, or close. After center is marked, you simply remove the column and index it accordingly. It just sits on a splined shaft, so you can pretty much get it dead center. Reinstall everything and be on your way!

I have circled the three bolts to remove, as well as the column. This is the best picture I have, but you should be able to figure it out.

Steering.jpg